5ET 6.3-R

Type 5ET / 5ETP Time-lag Fuse Series (High Surge-proof, Enhanced-Breaking Capacity) 5ET/5ETP Series, 5x20mm Glass Tube Time-lag Fuse RoHS 2 Compliant Description 5x20mm Time-lag fuse, high surge-proof, enhanced breaking capacity, glass tube body cartridge fuse designed, approved and complied with IEC 60127-2,standard sheet 6. Features - Meet IEC standard 60127-2, sheet 6 - Wide operating temperature range - Bulk and Tape & Reel packing available - RoHS 2 compliant - Halogen Free - Lead Free Applications Provide individual protection for components or internal circuits. - Power supplies - Battery charger - Monitor LEAD FREE = - Adapter HALOGEN FREE = Physical Specifications Body : Glass Materials Cap : Nickel Plated Brass Caps Leads : Matte Tin Plated Copper On Fuse : “bel”, ”T”, ”Current Rating”, “E”,”250V”, ”Appropriate Safety Logos”, ”  ”（ RoHS 2 compliant） Marking On Label : "bel", "5ET”or”5ETP", "Current Rating", "Voltage Rating", "Interrupting Rating", "Appropriate Safety Logos" and " ", " "(China RoHS compliant). Electrical Characteristics (IEC-127-2 STANDARD SHEET 6 ) Safety Agency Approvals Rated Current 1A to 12A 1.5 In 2.1 In 2.75 In 4 In 10 In MIN MAX MIN MAX MIN MAX MIN MAX 1 hr. 2 min. 600 ms 10 sec 150 ms 3 sec 20 ms 300 ms In clause 9.2, the test voltage for 5ETP ratings from1A to 6.3A is 63VDC. Safety Agency Safety Agency Certificate Voltage Rating (V) 1720086 1400794 Ampere Range / Volt @ I.R. ability* 1A-6.3A/250V AC@150A 8A-12A/250C AV@150A 40007746 E20624 1A-12A / 250V AC 1A–6.3A / 250V AC@150A LR39772 2003010207030342 *I.R.= Interrupting Rating = Short Circuit Rating(Amps) Specifications subject to change without notice belfuse.com/circuit-protection Type 5ET / 5ETP 2/4 Environmental Specifications Shock Resistance MIL-STD-202G, Method 213B, Test Condition 1 (100 G's peak for 6 milliseconds; Sawtooth waveform) Vibration Resistance MIL-STD-202G, Method 201A (10-55 Hz, 0.06 inch, total excursion). Salt Spray Resistance MIL-STD-202G, Method 101E, Test Condition B (48 hrs). Insulation Resistance MIL-STD-202G, Method 302, Test Condition B (After Opening) 100,000 ohms minimum. Solderability MIL-STD-202G, Method 208H Resistance to solder Heat MIL-STD-202G, Method 210F, Test Condition B. (260+/-5℃,10+/-1 sec) MIL-STD-202G, Method 107G, Test Condition B Thermal Shock (-65℃ to +125℃). Operating Temperature -55℃ to +125℃ Terminal Strength IEC-68-2-21 Electrical Specifications Catalog Number Typical Cold Volt-drop Ampere Resistance @100%In Rating (ohms) (Volt) max. Voltage and Interrupting Ratings Maximum Melting I²T Melting I²T Power